Driveway Cleaning Brisbane | Pressure Clean & Seal | Washing Master
Brisbane & Surrounding Areas

Driveway Cleaning Brisbane

Looking for driveway cleaning near me in Brisbane? Oil stains, mould and years of traffic grime make driveways look neglected and become dangerously slippery. We pressure clean driveways back to their original condition — then seal the surface so it stays that way for years.

Get a Free Quote See Pricing Our Services
3–5 yrs
Sealer protection life
From $3/m²
Clean only pricing
2-in-1
Clean & seal in one visit
100%
Slip hazards removed
Why it matters

A dirty driveway is more than just an eyesore

Driveways in Brisbane cop a lot — oil leaks, tyre marks, mould from wet seasons and general grime from traffic and weather. Over time, algae and mould make the surface slippery when wet, which is a real safety hazard around garages, paths and entry areas.

At Washing Master, we specialise in driveway pressure cleaning in Brisbane — using high-pressure washing suited to concrete, pavers, exposed aggregate and brick. Power washing your driveway removes stains, mould and grime right down to the surface. We then apply a quality sealer that protects against future staining, repels water and keeps it looking clean for years longer.

Sealing after cleaning isn't just cosmetic — it closes the pores in concrete and pavers that allow oil, mould and algae to penetrate. A sealed driveway is significantly easier to keep clean and resists staining far better than an unsealed one.

Surface types

Driveway surfaces we clean in Brisbane

Different surfaces need different pressure levels and pre-treatment. We adjust our method to suit the material — never one pressure setting for everything.

Concrete & cement driveways

Concrete cleaning is our most common job. High pressure combined with degreaser pre-treatment removes oil, mould and embedded grime. Sealing afterwards prevents rapid re-staining.

Pavers and paving

Paver pressure cleaning uses lower pressure to avoid dislodging sand joints. We re-sand joints after cleaning where needed. Sealing locks in the sand and stops weed growth returning.

Exposed aggregate

Exposed aggregate holds grime in the texture. We use controlled pressure to clean deep into the surface without dislodging aggregate, restoring the original stone colour and grip.

What we remove

What we remove when we pressure wash your driveway

Oil and grease stains

Pre-treated with a specialist degreasing solution before pressure washing — breaking down and lifting even old, set-in oil stains from concrete and pavers. One of the most common requests we get in Brisbane.

Mould and algae

A chemical treatment kills mould and algae at the root before rinsing — preventing rapid regrowth and removing the slippery surface hazard that builds up over Brisbane's wet season.

Tyre marks and traffic stains

High-pressure driveway cleaning removes rubber deposits, tyre marks and embedded traffic grime that regular hosing never touches. Makes a significant difference on concrete near garage doors.

General dirt and weathering

Years of rain, dust and foot traffic leave a layer of ingrained grime that dulls the surface. Pressure washing the driveway restores the original colour and texture.

How we work

Our driveway pressure cleaning process

1

Surface assessment

We check the driveway material (concrete, pavers, exposed aggregate, brick), identify oil stains or heavy mould areas, confirm edge conditions and assess suitability for sealing.

2

Pre-treatment of stains

Oil stains and heavy organic growth are pre-treated with specialist solutions to break them down before the main pressure clean begins. This is what separates a proper clean from a basic rinse.

3

High-pressure driveway clean

We pressure clean the entire driveway using the right pressure for the material — restoring the original colour and removing all surface contamination. Edges and joins are done by hand where needed.

4

Sealer application (optional)

Once the surface is clean and fully dry, we apply a quality penetrating sealer that protects against oil, water, staining and algae for 3–5 years. We offer both gloss and matte finishes.

Transparent pricing

How much does driveway cleaning cost in Brisbane?

Pricing depends on the size of the driveway, surface type and whether you're combining clean and seal or just cleaning. We always quote both options upfront so you can decide.

Clean only
From $3/m²
Clean & seal from $5–6/m²

Final price depends on:

  • Size of the driveway or pathway
  • Surface type (concrete, pavers, exposed aggregate)
  • Level of oil staining and mould buildup
  • Whether sealing is included
  • Access and any obstacles

Quick guide: A standard double driveway (approx. 50m²) typically costs $150–$200 to clean only, or $250–$350 with sealing. Use our calculator for a fast estimate based on your specific driveway size.

Use the pricing calculator Get a quote
Common questions

Frequently asked questions

Are you driveway cleaners near me on Brisbane's south side?
Yes — we're based on Brisbane's south side and service Mount Gravatt, Carindale, Mansfield, Wishart, Holland Park, Eight Mile Plains, Sunnybank, Runcorn, Macgregor, Camp Hill, Rochedale, Tarragindi, Morningside and surrounding suburbs. Get in touch to confirm your area.
How much does driveway cleaning cost in Brisbane?
Driveway pressure cleaning in Brisbane starts from around $3/m² for clean only. A standard double driveway typically costs $150–$200 to clean, or $250–$350 with sealing. Larger driveways, heavy oil staining or exposed aggregate may cost more. We always provide a fixed quote upfront — use our pricing calculator for a fast estimate.
Do I need to seal after cleaning?
You don't have to, but it's strongly recommended. Sealing closes the pores in concrete and pavers that allow oil, mould and algae to penetrate — making the surface significantly easier to keep clean and extending the time before your next professional clean by 1–2 years.
Can you remove oil stains from a driveway?
In most cases yes. We pre-treat oil stains with a specialist degreasing solution before the pressure clean — this breaks down and lifts even old, set-in stains from concrete and pavers. Very old or deeply set stains may lighten significantly rather than disappear completely, which we'll flag before starting.
Will pressure washing damage my pavers or concrete?
Not when the correct pressure is used for the surface type. We adjust pressure based on the material — pavers and exposed aggregate require lower pressure than plain concrete. We never use more pressure than necessary, and we re-sand paver joints after cleaning where needed.
How long do I need to stay off the driveway after sealing?
We recommend keeping foot traffic off for at least 2–4 hours and vehicles off for 24 hours after sealing. We'll give you the exact timing based on conditions on the day.
How often should I clean and seal my driveway?
Cleaning every 1–2 years keeps it looking good and removes safety hazards. Sealing lasts 3–5 years depending on traffic and weather exposure. We'll give you a recommendation specific to your driveway at the end of the job.
Where we work

Driveway cleaning across Brisbane's south side

We service all suburbs on Brisbane's south side. Click your suburb for local details or get in touch if yours isn't listed.

Carindale Mount Gravatt Hawthorne Bulimba Mansfield Wishart Eight Mile Plains Sunnybank Holland Park Tarragindi Runcorn Macgregor Morningside + more suburbs

Not sure if we cover your area? Get in touch — we'll let you know straight away.

Other services

Often booked with driveway cleaning

Many customers combine driveway cleaning with a full exterior clean in one visit — saves time and travel costs.

+ House washing Brisbane + Roof cleaning Brisbane + Window cleaning Brisbane + Patio & deck cleaning + Gutter cleaning Brisbane + Commercial pressure washing

Ready to restore your driveway?

Get a fast, fixed quote for driveway pressure cleaning in Brisbane — clean only or clean and seal.

Get a Free Quote Calculate the price